Use Safety Hose Ramps when you have to place hoses, cables, piping or ducting across an area, roadway or footpath and where it is important to maintain access whilst at the same time ensure that production is not stopped. Pipes and cables up to 4" in diameter are protected. This Safety Hose Ramp is a moulded rubber hose ramp designed to protect 2 x 100mm diameter hoses. The part has two open top channels. Each channel is 95mm at the base opening up to 102mm at the top. The depth of each channel is 94mm. Each face of the ramp has three yellow visibility strips embedded into slots. The ramp is supplied with 2 connecting connectors fitted.
Safety Requirement: Ramp warning signs should be positioned to warn road users of the obstruction and to Approach with Minimum Speed.